www.icomamerica.com

WRE can provide custom handsets and mute circuits on all VHF radio equipmnet. Please ask when placing an order.

 

IC-M88IS - VHF Marine Transceiver

Tough construction, superior waterproofing

The IC-M88 IS is built tough to withstand hazardous and inhospitable environments at sea and on land. Even if the IC-M88 IS is dropped into water, complete waterproofing* will protect it from harm. The compact and durable body meets military specifications (MIL-STD).
* Equivalent to JIS waterproof grade 7. (1m depth for 30 minutes)

Waterproof speaker-mic, HM-138 IS

An optional waterproof speaker-microphone, the HM-138 IS, provides reliable operation, even with the IC-M88 IS securely on your belt.

Simple operation

6 clearly labeled buttons on the front panel and the volume/power knob maximize simplicity of operation. Even when wearing gloves, the large buttons are easy to operate. A large, clear LCD with backlighting and backlit buttons make night time operation simple.

Intrinsically safe version approved
by Factory Mutual Research Corporation

This IS version of the M88 conforms to intrinsically safe rating of the FMRC (Factory Mutual Research Corporation). It can be used in many hazardous marine environments such as petroleum tankers and bulk cargo carrier. Ask your dealer for details.

Intrinsically safe Class Ι, ΙΙ and ΙΙΙ, Division 1, Groups C, D, E, F, and G; Nonincendive Class Ι, Division 2, Groups A, B, C and D hazardous locations when used with Icom BP-227FM battery pack. “Max. Temp. T3C at 40°C”

Data Sheet

   
   
   
   
   
   

IC-M506 VHF Marine Transceiver

Integrated AIS Receiver

With an integrated AIS receiver, the IC-M506 can show AIS vessel traffic information on the display. The AIS target call function allows you to easily set up an individual DSC call. The Plotter, Target list and Danger list can be toggled on the display.

NMEA 2000® and NMEA 0183 Connectivity

With the plug-and-play functionality of NMEA 2000, the IC-M506 can easily connect to a NMEA 2000 network and interconnect with other equipment. Also the NMEA 0183 input/output can be used for external GPS/NAV interface.

Last Call Voice Recording

The last call voice recording function automatically saves the last two minutes of the last incoming call. You can also start recording manually.

Active Noise Cancelling

The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call.

25W Two-Way Hailer

When connected to an external hailer horn, you can talk to people on the deck or shore from the radio’s microphone and can hear people’s reply via the hailer horn. Foghorn and RX speaker functions are also available.

Optional COMMANDMIC™ HM-195B/SW

The optional COMMANDMIC, HM-195B/SW provides 2nd station capability for using the IC-M506 from a separate cabin or tower. Most functions including DSC and AIS functions can be controlled from the COMMANDMIC and can be used as an intercom between the IC-M506 and the COMMANDMIC.

Large LCD and Intuitive User Interface

The IC-M506 is equipped with 132×96 pixels dot-matrix display which is larger than the IC-M504 (132×64 pixels). Reading GPS, AIS, DSC and radio menus are easier than ever. The bottom line of the display shows the software key functions and the functions can be toggled with the left and right buttons.

 

 

M-506 Product Sheet

 

 

   
   
   
   
   

IC-M604 VHF Marine Transceiver

Superior receiver performance

The IC-M604A has excellent receive specifications* which allow a weak signal a better chance of being heard when louder signals are around it. The powerful 5.0W (typical) audio output from the front facing speaker further increases the audibility and quality of received calls.

Large LCD with dot-matrix characters

The large full dot-matrix display is designed for optimum readability in any lighting condition. With the extra large font, the channel number is maximized on the display and upper and lower case characters can be easily read.

Submersible construction
(1m depth for 30 minutes)

The IC-M604A, including the supplied microphone, withstands submersion in up to 1.0m depth of water for 30 minutes. It is equivalent to IPX7 waterproofing.*

Built-in ITU Class-D DSC

No matter what channel you're tuned to, a separate and independent receiver inside the M604A continuously monitors Ch. 70. The 10-keypad allows simple and efficient operation of the DSC emergency functions, vital for your safety at sea.

Position request and position report

Over and above the DSC, your own and other ships´ position data can be exchanged with the position request or position report functions. The received position information can be transferred to external GPS or navigation equipment*. In addition, the polling (request/ reply) function checks whether a specific ship is within the communications range.

Front and rear panel microphone connection

The speaker microphone can be detached from the front panel and can be connected to the rear panel without any modification. An optional 6.1m (20ft) microphone extension cable, OPC-1000, is available.

RX speaker function

The RX speaker function, receiver-repeater allows you to monitor the received radio audio from a hailer horn on the deck or tower. You can also make an announcement on-board from the microphone.

Other features

  • Dual/tri-watch function for monitoring Ch.16 and/or call channel
  • 7 levels adjustable backlit display and keypad
  • Optional voice scrambler, UT-112 for private communication
  • Weather channels with weather alert function
  • AquaQuake draining function emits a vibrating sound and clears water away from the speaker grill
  Data Sheet
   
   
   
   
   

CommandMICIII

IP-X8 submersible, plug-and-play connectivity, controls all function (including DSC) of Icom's IC-M504A or IC-M604A VHF marine radios. Large LCD with adjustable lighting level. Doubles as an intercom. IC-M604A accepts up to 2 COMMANDMICIIIs. It's like getting a second (or third) on-board radio station for the cost of an accessory

  • The COMMANDMICIIITM (HM-162B/SW) remote-control microphone size (W × H × D): 65.5 × 150 × 38 mm; 2.5 × 6 × 1.5 in.
  • Weight (approx.; except cables): 13.6 oz.
  • Supplied accessories:
    6.1m (20ft) of cable, OPC-1540, with external speaker terminal
    Microphone hanger
    Mounting base for cable connector
   
  Back to top